TESLA BLATNÁ, as

Ignition lead sets – marking, technical specificationsTESLA ignition lead sets are made of different types of cables, their basic construction and parameters are described below. Sets comply tothe ISO 6856, ISO 3808 and SAE J2301 international standards. All TESLA sets meet screening parameters according to the EEC 10.TESLA ignition lead sets are identified with the catalogue number T001X, that defines the type and colour of the leads within a set and isused at the same time as a number to be used in orders.Catalogue number of an ignition lead setT 0 0 1 XX= B, G, H, S – sets with resistive coreX= C – sets with copper coreX= M, P – sets with inductive coreALFA ROMEOI145 (930) 1.4 i.e. 07.94 - 12.96 66 1351 AR 33501 T597BConstruction of sets - resistive coreThe conductive silicone core (1) of the ignition lead consistsof core substrate (a) and core exterior (b). Core substrateconsists of aramid and glassfibre bundle and core exterioris formed by conductive silicone compound. Glass fibresensure high tension stability and conductive elementsensure maximum effectivity of both energy transmissionand attenuation. The braided (3) inner insulation (2) provideselectric insulation and improves mechanical qualities inthe bend area. The outer silicone jacket (4) protects thecore, including the insulation, against the conditions ofthe working enviroment under the bonnet. Ignition lead isfurnished with contacts. These contacts (5) are specific bytheir shape (6) in order to ensure the connection between aspark plug and distributor (coil and distributor). The shapeand construction of the contacts meet the actual demandsfor application.43 b251 6a6Technical specification - cable parameters - resistive coretype of cable outer jacket temperature class cableTESLA set diameter range ISO 3808 colourT xxxB 7 mm silicone -40 … + 220°C E blackT xxxG 8 mm silicone -40 … + 220°C E greyT xxxH 7 mm EVA -40 … + 200°C D blueT xxxS 7 mm silicone -40 … + 220°C E blue5240