gb use and maintenance manual blast chiller/shock freezer

More documents

Recommendations

Info

OTHER RISKSThere is a drainage hole in the bottom of the cold storage appliance to allow any liquids deriving from the foods orfrom cleaning products to flow out.IT IS ESSENTIAL TO RECLOSE THE HOLE WITH THE PLUG PROVIDED.3.3 SAFETY DEVICES ADOPTEDCAUTION: TAMPERING WITH OR REMOVAL OF THE SAFETY DEVICES ADOPTED IS ABSOLUTELYFORBIDDEN.THE MANUFACTURER DECLINES ALL RESPONSIBILITY IN CASE OF FAILURE TO COMPLYWITH THESE INSTRUCTIONS.3.4 PERFORMANCESThe chilling and freezing time, depending on the type of food or on the food in a cooked dish, is a very difficultparameter to define with accuracy. The stated performances have been achieved with mashed potatoes incommercially avaiable 180x280x40H mms aluminum containers.The thickness of the mashed potatoes into the carton containers is 25 mms.N.B.: Testing was carried out using the “HARD” cycle.THE REFERENCE PERFORMANCES FOR THE SINGLE-MODULE BLAST CHILLER ARE:1) Chilling from +70°C to +3°C in 90 minutes on 18 Kg. of product.2) Freezing from +70°C to -18°C in 240 minutes on 12 Kg. of product.THE REFERENCE PERFORMANCES FOR THE SINGLE-MODULE BLAST CHILLER BC/BF051 ARE:1) Chilling from +70°C to +3°C in 90 minutes on 18 Kg. of product.2) Freezing from +70°C to -18°C in 240 minutes on 12 Kg. of product.THE REFERENCE PERFORMANCES FOR THE DOUBLE-MODULE BLAST CHILLER BC/BF101 ARE:1) Chilling from +70°C to +3°C in 90 minutes on 30 Kg. of product.2) Freezing from +70°C to -18°C in 240 minutes on 21 Kg. of product.THE PERFORMANCES OF 3 MODULAR SHOCKFREEZER BC/BF151 ARE:1) Chilling from +70°C to +3°C in 90 minutes on 46 Kg. of product.2) Freezing from +70°C to -18°C in 240 minutes on 30 Kg. of product.17
4. INSTRUCTIONS FOR THE USERThe information in this section is intended for staff without specific qualifications.4.1 PUTTING INTO OPERATION4.1.1 DESCRIPTION OF THE CONTROL PANEL, LIGHTS AND BUTTONS“GN” BLAST CHILLER - “GN” BLAST CHILLER / SHOCK FREEZER1 Compressor run indicator 14 Compartment/code probe temperature display button2 Display 15 Compartment temperature indicator3 Alarm indicator 16 Timer cycle activation indicator4 Compartment fan run indicator 17 Timer cycle activation/display button5 Core probe indicator 18 *Subzero temperature storage cycle indicator6 Defrosting indicator 19 Storage selector button7 Programming button 20 Above zero temperature storage cycle indicator8 Programming indicator 21 *Shock freezing cycle selector9 Power ON indicator 22 *Cycle selected indicator10 Control unit ON/OFF button (DOWN) 23 Blast chilling cycle selector11 Germicidal lamp indicator 24 Cycle selected indicator12 **Germicidal lamp button (UP) 25 Cycle start/stop button13 Core probe temperature indicator 26 Cycle ON indicator* ONLY FOR BLAST CHILLER / SHOCK FREEZER** OPTIONAL (EXCEPT FOR MF051T MODEL)4.1.2 DESCRIPTION OF CONTROL PANEL BUTTONSSTART/STOP BUTTON (25)Pressing the START/STOP button after selecting an operating cycle button will cause the appliance to start up.If the START/STOP button is pressed while the appliance is running:- all functions will be interrupted;- all timers will return to zero;- the selection LED status present before pressing START/STOP will be maintained, so the cycle can be restartedat the press of a button.BLAST CHILLING CYCLE SELECTOR (23)With the appliance in STOP status, press button (23) for more than 1.5 seconds to scroll through the list ofavailable blast chilling cycles. To select the currently displayed blast chilling cycle, simply release the button.Pressing this button with the appliance in START status displays the currently active operating cycle (blast chillingor shock freezing).SHOCK FREEZING CYCLE SELECTOR (21)With the appliance in STOP status, press button (21) for more than 1.5 seconds to scroll through the list ofavailable shock freezing cycles. To select the currently displayed shock freezing cycle, simply release the button.Pressing this button with the appliance in START status displays the currently active operating cycle (blast chilling18
Page 1: HC163111IGBMANUALE D'USO E MANUTENZ
Page 4 and 5: 1.5 ISTRUZIONI PER RICHIESTA INTERV
Page 6 and 7: RISCHI DOVUTI AL RUMORELeq < 70 dB(
Page 8 and 9: TASTO CONSERVAZIONE (19)In STOP, se
Page 10 and 11: - ALLARME PRESSOSTATO;- ALLARME SON
Page 12 and 13: 5.3 GESTIONE PROGRAMMAZIONE CICLI P
Page 14 and 15: - Verificare che non ci sia influen
Page 16 and 17: 1.5 BEFORE CONTACTING THE AFTER-SAL
Page 20 and 21: or shock freezing).STORAGE CYCLE BU
Page 22 and 23: Alarms are also indicated by a mess
Page 24 and 25: A total of 2 of the 6 available cyc
Page 26 and 27: 7. EXTRAORDINARY MAINTENANCEThe inf
Page 28 and 29: ABBATTITORE/CONGELATORE - BLAST CHI
Page 30 and 31: SCHEMA ELETTRICOWIRING DIAGRAMSCHAL
Page 32 and 33: SCHEMA ELETTRICOWIRING DIAGRAMSCHAL
Page 34 and 35: LEGENDAKEYB1 Sonda temperatura B1 T
Page 36 and 37: INDICECONTENTSCAP.1 INSTALLAZIONECH
Page 38 and 39: ATTENZIONE: LA MACCHINA NON E' STAT
Page 40: 1.3 CONNECTION1.3.1 CONNECTION TO E

gb use and maintenance manual blast chiller/shock freezer

Create successful ePaper yourself

Delete template?

Save as template?