gb use and maintenance manual blast chiller/shock freezer

1. GENERAL INSTRUCTIONS AND PRECAUTIONS1.1 TESTING AND WARRANTYTESTINGThe product is shipped after passing visual, electrical and functional tests.WARRANTYOur appliances and the relative parts of our manufacture are covered by a warranty for 1 year from the invoicedate. Under this warranty, we undertake to supply free replacements for any parts which we, at our own absolutediscretion, accept as faulty.The manufacturer is obliged to correct any faults or defects, provided the cold storage appliance has been properlyused in accordance with the instructions given in the manual.During the warranty period, all labour and travelling expenses and all freight charges for parts or appliances to bereplaced will be met by the purchaser. Materials replaced under guarantee are our property and must be returnedto us by the purchaser at his expense.1.2 FOREWORDThis manual is intended to supply all information required for the correct installation, use and servicing of theappliance by skilled personnel.Before carrying out any operation, read the instructions herein carefully; they provide essentialinformation concerning the safety of the appliance.THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE OF THE PRODUCT.ALL COPYING OF EVEN PART OF THIS MANUAL IS STRICTLY FORBIDDEN.1.3 GENERAL SAFETY RULESThe manufacture declines all responsibility for any operations carried out on the appliance without following theinstructions in this manualCAUTION:CAUTION:CAUTION:CAUTION:CAUTION:CAUTION:CAUTION:CAUTION:Before connecting to the mains electricity supply check that the voltage and frequency are asindicated on the appliance nameplate.Always connect the appliance to a specifically provided high sensitivity (30 mA) differentialsecurity breaker.Before any cleaning or servicing, always disconnect the appliance from the mains power supply.Always wear gloves for servicing work on the condenser unit and/or the condensate evaporator tray,since they may both be at HIGH TEMPERATURE.Never insert screwdrivers or other items between the fan grilles.Never touch electrical parts with wet hands or bare feet.To ensure efficient operation of the compressore and evaporator unit, never block the air intakeswhen the appliance is in operation or connected to the power supply.All our appliances must be installed by skilled, authorized technicians familiar with refrigeration andelectrical systems. They must only be used by suitably trained staff. Extraordinary maintenanceprocedures, such as cleaning and servicing of the refrigeration system, must be carried out byskilled, authorized technicians familiar with refrigeration and electrical systems.1.4 ITEMS TO BE PREPARED BY THE CUSTOMER- Provide a high sensitivity (30 mA) differential security breaker.- Provide a mains power socket with earth.- Ensure that the surface on which the appliance is to be installed is perfectly flat.- Drain for compartment wash water- In case of appliances with water-cooled condensers or appliances with direct control of the humidity, provide amains water connection.14