caution - Tekno Point

In case ther are some obstacles to the line, please avoid to Ubend the the pipe (see figure below) otherways thereshould be a condensing water stagnation.We suggest to operate as figure below; it is to say to lower the pipe and let it continue in its course with the samedescent percentage.Don’t create obstacle for the condense outletDon’t create obstacle for the condense outletPump outletPump outletUnderceiling or ceiling◊ Air ventTo prevent the possibility of flooding do NOT fit an air vent in the drain pipe.Underceiling or ceilingDon’t create obstaclefor the condense outletPump outletUnderceiling or ceiling◊ Collective drain pipeWhen draining two or more units into a common drain pipe, ensure that the common pipe is at least 100mm below thedrain pipes from the individual units.≥100mm◊ Final test* Check whether the pipeline is unhindered.* New built house shoulds have this test done before paving the ceiling.1. Remove the test cover, and stow water of about 2 liter to thewater receiver throught the stow tube (as shown below).Test mouth2. Turn on the power, and operate the air conditioner under the“COOLING” mode. Listen to the sound of the drain pump. Checkwhether the water is discharged well (a lag of 1min is allowedWater receiverbefore discharging, according to the length of the drain pipe),and check whether water leaks from the joints.Cautions:If there is any malfunction, please resolve it immediately.3. Stop the air conditioner, turn off the power, and reset the testcover to its original position. The drain plug is used to empty thewater receiver for maintenance of the air conditioner. Pleasestuff it imposition at all time during operation to avoid leakage.Pump jointDrain plugBody54