VDW.GOLD® RECIPROC® - Vdw-dental.com

Problem Possible Cause Solution65THE BATTERY IS NOTWORKING PROPERLY• Despite observance of allprecautionary measures, thebattery discharges too quickly.• The device only works if thecharger is plugged into thepower supply – however not inbattery mode.The battery could be damaged.Send the device to your service centre.enCALIBRATION ERROR 1An incorrectly-connectedmicromotor could disrupt thecalibration process.Check whether the micromotor iscorrectly connected.CALIBRATION ERROR 2A VDW 6:1 contra-angle withexcessive resistance can causethe calibration process to abort.• Check whether the contra-angle ismalfunctioning.• Determine whether your contraanglecare and maintenance routinesare correct.• To rule out the possibility of themotor being defective, recalibrate themotor without the contra-angle.ROTARY FILEBLOCKED IN CANAL• Incorrect file settings.• Too much pressure on theinstrument.Switch to “backwards” ASR mode(red LED), restart the motor and carefullypull the file out.RECIPROCATING FILEBLOCKED IN CANAL• Too much pressure on theinstrument.• File not cleaned often enough(see details in the RECIPROC ®user‘s manual).Remove the file using a pair of pliersby pulling it and carefully twisting itclockwise.The display readsAPEX LOCATORERROR 3Apex locator cannot be switchedon due to a malfunction.• Check whether the lip clip and/or fileclip cables are inserted incorrectly ordamaged.• Check whether you have accidentallyconnected the file in the contra-angleto the file clip instead of the lip clip.• Check whether the original VDW 6:1contra-angle is being used.• Check whether the original lip clipcable and the original charger withferrite ring are being used.Endo Easy Efficient ®