N000959 Ultra Stand 11-2007.book - Crawford Garageporte

EnglishContentsIntroduction 7Product description 7Symbols 7Proper use, Guarantee 7Informal safety measures 7Safety instructions 7Installation precautions 8Safety features of the door operator system 8Safety checks 8Check overload cut-outControls and indicators 8Installation preparation 8Installation 8Commissioning 8Programming door operator 9Programming with remote transmitterProgramming without remote transmitterProgram/Delete remote transmitter 9Operation 9Settings / Options 9Warning phaseAutomatic closureChanging the direction of movementSoft runReset 10Fitting additional safety features 10Safety rail / photo cell / optosensorEmergency lock releaseOptional lighting system/Warning light 10Troubleshooting 11Interfering frequenciesSelf-testGeneral Problems / TroubleshootingChanging the fuseChanging the battery of the remote transmitterMaintenance intervals 11Declaration of conformity 11Technical data 12Replacement Parts 12Accessories (Optional) 12Removal, Disposal 12IntroductionRead operating instructions carefully before installing andcommissioning. Pay attention to the graphics and all notes.Product descriptionThe remote transmitter provided and located in the housing ofthe door operator is programmed to the door operator.Packaging: Only reusable materials are used. Dispose ofpackaging in an environmentally-friendly way and accordingto the legal guidelines in your area.Scope of delivery see page 123.SymbolsGBThe following symbols are used in this manual:CAUTION Warning against personal injury andmaterial damage. Non-observance of instructionsmarked with these symbols can result in serious injuries andmaterial damage.NOTE: Important technical instructions that mustbe observed.Proper use, GuaranteeThis door operator is suitable for use in domestic garages.Any other use is deemed improper.This product must not be used in a potentially hazardousexplosion atmosphere.The following actions require express written approval by themanufacturer:• Modifications or attachments• Use of parts other than factory authorized replacementparts• Repairs performed by persons or businesses that have notbeen authorised by the manufacturerIf this approval is not granted, the guarantee and warrantycan become void.We will not be liable for• damage due to non-compliance with operatinginstructions,• or due to technical errors in connecting the door operatorand structural deformations that may occur duringoperation,• or as a result of inappropriatedoor maintenance.Informal safety measuresKeep the operating instructions handy for future use.The inspection and test log book provided must be filled outby the person carrying out the installation and kept by theoperator along with other documentation (door, dooroperator).Safety instructionsSafety instructionsThe door operator may only be operated if the entirerange of motion is clearly visible. Be mindful of others withinthe effective range of this product during operation.Always disconnect electrical power when servicing the dooroperator.Actions prohibited during operation of a door operator:• Passing or driving underneath a moving door.• oLifting objects and / or persons with the door.The door must only be operated if• all users are familiar with its functions and operation.• the door is in accordance with European StandardsEN 12 604 and EN 12 605.• If the door operator is installed in compliance withEN 12 453, EN 12 445 and EN 12 635.• applicable, optional security features such as photo cell,optosensor and entrapment protection system are fullyfunctional.• garages without a second entrance have an emergencylock release from the outside. This may be orderedseparately if necessary.• any wicket door in the garage door is closed and isequipped with a safety device that prevents activationwhen the door is opened.• oafter changing the basic factory setting of the operatingforce (F1, F2) or after activating the automatic closure anadditional safety device such as a safety guide is installed.Ultra 7