10.07.2015 Views

Benutzerhandbuch - Online USV Systeme

Benutzerhandbuch - Online USV Systeme

Benutzerhandbuch - Online USV Systeme

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

I N S T A L L A T I O NModels with 2000 – 3000VA: Connect red with red, black withblack and green with green. Press both parts together firmly tocreate a good connection.All models: To connect a second battery module, release theplug connection on the first battery module. Carefully pull theconnection to connect the second battery module. Repeat theprocedure for each additional battery module.7. Ensure that the connections of the battery modules do notloosen. There must be sufficient bending radius and tensionrelief for all cables.Figure 8: Typical installation of multiple battery modules8. Inserting the front cover of the battery module:To insert the cover again, make sure that the cables of thebattery module are guided through the cable ejections. Thenslide the cover to the right until it engages in the holder on theright side of the housing. Reattach the two screws on the rightside of the front cover.Repeat the procedure for each additional battery module.9. Make sure that the complete wiring and all plug connections ofthe UPS system as well as the battery modules lie behind thefront cover and are not accessible to the user.93 / 222XS700-XS3000_manual_ger_eng_it_V1.1.0.doc ........................................................... R. Kistler

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!