Benutzerhandbuch - Online USV Systeme

M A I N T E N A N C E.................Figure 17: Replacing the internal batteries of the UPS system4. Unscrew the screws to the battery cover. Grab the batterycover at a corner and pull it carefully forwards. Take the batterycover and place it to the side.5. Carefully pull out the battery module insert by the grip andslide the batteries onto a level, stable support. Support thebatteries with both hands.NOTECheck whether the replacement batteries have the samespecifications as the old batteries.6. Replace the batteries in the battery module insert. Please readthe "Disposing of old batteries or the UPS system" section forinformation on proper disposal.7. Insert the battery module insert with the new batteries into thehousing. This requires some effort.8. Place the battery cover on the screw holders and run thebattery connection through the access slot. Secure the screwsagain.CAUTIONA small spark can occur when the batteries are connected tothe UPS system. This is normal and does not pose a hazardto people. Quickly and firmly insert the cable of the batteriesinto the battery plug connection of the UPS system.128 / 222XS700-XS3000_manual_ger_eng_it_V1.1.0.doc ........................................................... R. Kistler