A/C Components - Stixe

Receiver DrierGBThe Receiver DrierThe Block union type Receiver Drier for R134ais an example of a new, cost-effective product,which we have recently added to our aftermarketportfolio. This vital part of air-conditioningsystems has been specially developedfor the aftermarket. It goes without sayingthat the product is of the same quality as theReceiver Driers supplied OE to automobilemanufacturers.ReplacingReplace the Receiver Drier when the refrigerantcycle is opened for repair (for instancein the case of leakage or the replacement ofparts). The Receiver Drier also needs replacingwhen the system is empty and filled withair. Although the service interval for DENSOReceiver Driers is longer, thanks to the largeamount of desiccant, it is advisable to replacethis part of the air conditioning systemperiodically. The life of a Receiver Drier isprolonged if used regularly.Longer Life with Perfect DesignDENSO's Receiver Drier contains three timesas much desiccant as other aftermarket driers.That's why the moisture absorption is threetimes as high and gives your customers evenmore benefits. The filter in our Receiver Driercannot shift in cold conditions, a major advantageattributable to the fact that the desiccantfiler is not located in the middle of the bodybut immediately underneath the inlet andoutlet. Also the filter housing is securelyanchored within the drier casing.DENSO RECEIVER DRIERDENSO P/N OE L X H X D DESICCANT JOINT447810-9000 447810-0010 / 0040 207 mm x 70 x 70 mm 120 gr. Block447810-9010 447810-0020 / 0030 187 mm x 70 x 70 mm 120 gr. Block447810-9020 447810-0050 / 0060 167 mm x 70 x 70 mm 120 gr. Block447810-9030 447810-0100 / 0150 247 mm x 70 x 70 mm 160 gr. Block166 DENSO EUROPE BV