REGOLATORE CONTROLLER ATR121 ATR141 Manuale User ...

20 MEMORY CARD
Parameters and setpoint values can be easily copied from one controller
to others using the MEMORY CARD. The controller must be switchedoff
before entering the Card. Check also entry direction (components
must be turned towards front panel).
Switching-on the controller, display will show
3 .
1
2
Press Display Do
FNC
shows ,
shows .
The controller stores value
and restarts.
Select (Memo
load) to store values of
Memory on the controller.
Select to keep
values of the controller
unchanged.
Updating values of memory card
To update values of Memory card follow
the above proceedings, selecting
on display, so values of memory will not
be stored on the controller 4 . Enter
configuration mode, modify at least one
parameter and exit.
3 Only if values stored on Memory Card are correct.
4 If the controller does not visualize at starting, this means that no
values are stored on Memory Card, but they may be copied and updated.
28