Manuale Installatore - Elco Ecoflam
Manuale Installatore - Elco Ecoflam
Manuale Installatore - Elco Ecoflam
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ATTENTION:<br />
- Make sure the installation site and any systems to which the appliance must be connected comply with the applicable norms in force.<br />
- Use manual tools and equipment suitable for the intended use (in particular, make sure that the tool is not worn and that the handle<br />
is intact and fully fastened to the rest of the tool); use them correctly and make sure they don’t fall from a height. Put them safely<br />
back in place after use.<br />
(risk of personal injury from falling splinters or fragments, and damage to the appliance and surrounding objects).<br />
Select a suitable place of installation for the appliance,<br />
making sure you leave at least 100 cm around it.<br />
MIN<br />
100 cm<br />
MIN<br />
100 cm<br />
Make sure the installation does not affect the existing<br />
electrical or hydraulic systems.<br />
Use the external diameter of the cardboard template<br />
to define the position and size of the hole to be drilled<br />
in the ceiling.<br />
Choose the final position of the internal unit on the ceiling<br />
with the aid of references ìA-B-C-Dî printed on the<br />
cardboard template.<br />
Use the threaded rod and suitable rawlplugs to fasten<br />
the unit to the ceiling.<br />
With the help of a masonís level, ensure the unit is<br />
fully horizontal and suitably secured to the ceiling.<br />
NUT<br />
FISCHER<br />
SUSPENSION<br />
BRACKET<br />
Fasten the spacer bars in positions 1-2-3-4, according<br />
to the directions on the cardboard template.<br />
NOTES:<br />
· Do not kink or constrict the piping of the internal unit in any way. Avoid bends measuring less than 10 cm in radius.<br />
· Do not bend the same section of the pipe too often as it could kink after 3 attempts.<br />
· Remove the closing plugs from the internal unit piping only immediately before you make the connections.<br />
· In order to avoid the deformation of the side panels, we recommend you refrain from tightening the screws too much<br />
during assembly.<br />
24