Manuale utente_Owner's manual_Manuel d ... - Husqvarna

STEERING LOCK (TE)
The motorcycle is equipped with a steering lock (1) on
the R.H. side of the steering head tube.
To lock it, proceed as follows:
Turn the handlebar to the left, place the key in the switch
and turn counter clockwise. Push the key in (if necessary,
turn handlebar in both directions). Turn the key clockwise
and remove it from the switch.
To unlock the steering, reverse the above procedure.
RIGHT-HAND HANDLEBAR SWITCH
The right-hand switch features the following controls:
(TE-TXC)
1) Engine start button
2) Engine KILL SWITCH.
(TC)
1) Engine start button
2) Double map push-button
pressed for motorcycle SOFT performance;
released for motorcycle HARD performance.
to switch map from hard to soft (and vice-versa), proceed
as follows:
- stop engine;
- wait for about 10 seconds;
- switch the push-button;
- start engine.
LEFT-HAND HANDLEBAR SWITCH (TE)
The left-hand handlebar switch contains the following
commands:
1) High beam flasher (self-cancelling)
2) High beam
Low beam
3) Left-hand turning indicators (self-cancelling)
Right-hand turning indicators (self-cancelling)
To deactivate the turning indicators, press the control
lever after it is returned to the centre.
4) Warning horn
EN
1
2
1
2
1
4
3
EN - 17