30.10.2014 Views

TXC 511 2013 IE - Husqvarna

TXC 511 2013 IE - Husqvarna

TXC 511 2013 IE - Husqvarna

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

REAR BRAKE FLUID LEVEL CHECK<br />

Fluid level inside master cylinder shall never be below<br />

the min. level indicated on reservoir (1).<br />

A decrease of the fluid level will let air into the system,<br />

hence an extension of the lever stroke.<br />

WARNING*: If the brake pedal feels<br />

mushy when pulled, there may be air in<br />

the brake lines or the brake may be defective.<br />

Since it is dangerous to operate<br />

the motorcycle under such conditions,<br />

have the brake system immediately<br />

checked by the <strong>Husqvarna</strong> Dealer.<br />

CAUTION*: Do not spill brake fluid onto<br />

any painted surface or light lens.<br />

CAUTION*: Do not mix two brands of fluid.<br />

Completely change the brake fluid in<br />

the brake system if you wish to switch<br />

to another fluid brand.<br />

CAUTION*: Brake fluid may cause irritation.<br />

Avoid contact with skin or eyes. In<br />

case of contact, flush thoroughly with<br />

water and call a doctor if your eyes<br />

were exposed.<br />

ADJUSTMENT OF THE HYDRAULIC CLUTCH CONTROL LEVER<br />

Free play (A) shall be of at least 3 mm (0.118 in).<br />

Lever (1) position on handlebar could be modified, based<br />

on rider's hand size.<br />

To decrease the lever distance from the handgrip, rotate<br />

the adjuster (B) CLOCKWISE.<br />

To increase the lever distance from the handgrip, rotate<br />

the adjuster (B) COUNTER CLOCKWISE.<br />

1<br />

EN<br />

A<br />

B<br />

1<br />

SPECIFICATIONS - OPERATION - MAINTENANCE<br />

EN - 35

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!