TXC 511 2013 IE - Husqvarna

ENGINE STARTING (TE-TXC)
With cold engine, i.e., after the motorcycle has not
been used for a while or in low ambient temperatures,
operate in the following manner:
1) pull clutch lever (1) and hold it in place;
2) shift gear pedal (2) to neutral position;
3) press the starter button (3), then release clutch lever
(1).
When a cold engine has just been started, do not
increase revs, to ensure an adequate oil warm-up
and circulation.
Note*:
A safety switch allowing to start engine ONLY when
the clutch lever is pulled is assembled onto clutch lever
mount.
TE
TXC
1
1
N
2
EN
IMPORTANT
NEVER START ENGINE WITH BATTERY DIS-
CONNECTED FROM CIRCUIT.
3
IMPORTANT
DO NOT OPERATE THE THROTTLE CON-
TROL WHILE STARTING-UP.
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 21