TXC 511 2013 IE - Husqvarna

ENGINE STOP BUTTON (TC)
Engine stop push-button (1) is located on handlebar lefthand
side. Press it to cut the engine electric supply circuit,
switching it off.
CAUTION*:
Do not inadvertently press push-button
(1) when riding the vehicle.
CLUTCH CONTROL
The hydraulic clutch control lever (1) is located on the lefthand
side of the handlebar and is protected against dirt.
The position of the clutch control on handlebar can be
adjusted by loosening the retaining screws (A).
CAUTION*
Do not forget to tighten the screws after
the adjustment.
REAR BRAKE CONTROL
The rear brake control (1) is placed on the right-hand
side of the motorcycle.
TE:
A stop switch, during the braking action, causes the stop
light on the tail light to come on.
TE
1
A
TC-TXC
A
1
1
1
EN - 18
SPECIFICATIONS - OPERATION - MAINTENANCE