TXC 511 2013 IE - Husqvarna

SIDE STAND
A side stand (1) is supplied with every motorcycle.
WARNING*: The stand is designed to
support the WEIGHT of the MOTORCY-
CLE ONLY. Do not sit astride the motorcycle
using the stand for support this could
cause structural failure to the stand resulting
in serious injury.
WARNING*: The motorcycle MUST be set
on the side stand ONLY AFTER the rider
has got off the vehicle. Stand AUTOMATI-
CALLY folds back to rest position once
the vehicle is vertical, no longer resting
on the ground.
TE-TXC:
Periodically check the side stand (see “Scheduled Maintenance
Chart”); make sure that the springs are not damaged
and the side stand freely moves. If the side stand is
noisy, lubricate the fastening pivot (A).
COLD START
TE-TXC:
These models feature an automatic starter positioned
onto throttle body that is automatically enabled based
on external temperature and engine temperature.
TC:
For cold start, motorcycle is equipped with a knob (1)
positioned on throttle body left side. Pull knob to enable
starter, push it to close it.
EN
TC
TE-TXC
TC
1
A
1 1
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 13