BR 60/95 RS Bp BR 60/95 RS Bp Pack BD 60/95 RS Bp ... - Kärcher

Faults
Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove it. Pull out the battery plug.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
1 Screw
2 Cover
3 Drive chain
Loosen screws.
Remove the lid.
Check the chain drive and pinion for
wear.
Frost protection
In case of danger of frost:
Empty the fresh and dirt water reservoirs.
Store the appliance in a frost-protected
room.
Faults with display (only BD)
Display Cause Remedy By whom
0814 Fault in drive motor control Customer
Service
7600 Fault in brush drive Reset fuse of brush drive. Operator
7800 Connection cable to drive motor
is defective
Customer
Service
7801 Control is overheated Switch off device and let it cool down. Operator
7802
9000 No brushes inserted in cleaning
head
Insert brushes
Operator
Battery charge is low Charging battery Operator
Switch on the device when the
accelerator pedal has been activated.
Release accelerator pedal, turn the key switch to "0", turn the key
switch to "1", press the safety pedal, press unlocking key, press
accelerator pedal.
Operator
22 English