09.02.2014 Views

Frischwasser-Modul FriWa für die Trinkwasser-Erwärmung nach ...

Frischwasser-Modul FriWa für die Trinkwasser-Erwärmung nach ...

Frischwasser-Modul FriWa für die Trinkwasser-Erwärmung nach ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

- pulse-driven (depending on the need / requirements), the short opening of a hot water tap (tap<br />

pulse) starts the circulation pump. The circulation pump will then run for several minutes<br />

(adjustable).<br />

- time-dependant, the operation of the circulation pump can be adjusted within an arbitrary<br />

period of time on a “week clock”. The circulation will start at the beginning of the period of time<br />

chosen. It will stop after the end of the chosen period of time.<br />

- time- / temperature -dependant, the operation of the circulation pump can be adjusted<br />

within an arbitrary period of time on a “week clock. The circulation only starts when the<br />

adjustable min. temperature on the heat exchanger is exceeded within the period of operation<br />

chosen. The circulation stops after the required temperature has been reached i.e. after the end<br />

of the chosen period of time.<br />

While delivered, the circulation (see user’s manual of the controller, menu „OPTIONEN“) is<br />

preset on „NEIN“ (OFF). After the assembly of the circulation, it is obligatory to select one<br />

mode of operation.<br />

A circulation temperature of more than 55°C favorizes the calcination of the heat<br />

exchanger. The water preparation cannot be germfree at circulation temperatures of<br />

under 50°C!<br />

Gravity brakes<br />

The primary circuit (heating circuit) is provided with a<br />

gravity brake inside the thermovalve (7), in order to<br />

securely avoid unwished recirculations (gravity circulation).<br />

For the filling, dearating and purging of the system, the<br />

gravity brake has to be open. This is<br />

done by half-opening the<br />

thermovalve (7) (with a n° 14 flat<br />

wrench). The ball of the ball valve<br />

pushed the gravity brake open.<br />

9<br />

For the operation of the system, all<br />

ball valves and valves need to be<br />

open completely<br />

An inserted lock valve – serving as return flow inhibitor –<br />

is located in the connection of the circulation tubing (T,<br />

9). This way it can be assured that possible short-circuit<br />

flows through the circulation tubing during the hot water<br />

extraction can be avoided.<br />

7<br />

Frage: Entlüftung des Zirkul-stranges = ?????<br />

19/59

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!