guida alla posa delle membrane con adesivo a freddo - Index S.p.A.
guida alla posa delle membrane con adesivo a freddo - Index S.p.A.
guida alla posa delle membrane con adesivo a freddo - Index S.p.A.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
COOL ROOF<br />
IMPERMEABILIZZAZIONE AD ALTA RIFLETTIVITÀ ED EMISSIVITÀ<br />
I RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA<br />
GB WATER-BASED ELASTOMER/BITUMINOUS COATING<br />
D RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA<br />
F WATER-BASED ELASTOMER/BITUMINOUS COATING<br />
NL WATER-BASED ELASTOMER/BITUMINOUS COATING<br />
TO BE APPLIED BY<br />
PLASTERING TROWEL<br />
TO BE MEHANICALLY<br />
ONE-COMPONENT<br />
WATER BASED<br />
MIXED<br />
A H 2 O<br />
MONOCOMPONENTE VEICOLO ACQUA<br />
MESCOLARE<br />
MECCANICAMENTE<br />
TO BE APPLIED TO BE APPLIED MINIMUM APPLICATION<br />
BY BRUSH<br />
BY ROLLER<br />
TEMPERATURE<br />
+ 5°C<br />
APPLICARE CON APPLICARE CON TEMPERATURA MIN.<br />
PENNELLO<br />
RULLO<br />
DI APPLICAZIONE<br />
SPRAY<br />
APPLICATION<br />
APPLICARE A<br />
SPRUZZO<br />
KEEP AWAY<br />
FROM FROST<br />
APPLICARE CON<br />
FRATTAZZO<br />
USE SUITABLE<br />
PROTECTION<br />
STOCCAGGIO:<br />
UTILIZZARE DISPOSITIVI<br />
TEME IL GELO DI PROTEZIONE INDIVIDUALI<br />
37060 Castel d’Azzano - Verona - ITALY - tel. 045.512233<br />
Partita kg e<br />
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY<br />
5. MASTICOLL<br />
8. MINERAL FLEXTER TEX<br />
7. MASTIPOL<br />
6. Isolante<br />
termico<br />
9. WHITE REFLEX<br />
STRATIGRAFIA<br />
1. Supporto cementizio<br />
2. INDEVER<br />
3. MASTIPOL<br />
4. DEFEND o DEFEND ALU<br />
POLIESTERE<br />
5. MASTICOLL<br />
6. Isolante termico<br />
7. MASTIPOL<br />
8. MINERAL FLEXTER TEX<br />
9. WHITE REFLEX<br />
3. MASTIPOL<br />
4. MINERAL<br />
FLEXTER TEX<br />
5. WHITE REFLEX<br />
STRATIGRAFIA<br />
1. Supporto in legno<br />
2. ELASTOCENE POLIESTERE<br />
chiodato<br />
3. MASTIPOL<br />
4. MINERAL FLEXTER TEX<br />
5. WHITE REFLEX<br />
4. DEFEND o<br />
DEFEND ALU<br />
POLIESTERE<br />
3. MASTIPOL 1. Supporto<br />
2. INDEVER<br />
cementizio<br />
2. ELASTOCENE<br />
POLIESTERE<br />
chiodato<br />
1. Supporto<br />
in legno<br />
Verniciando la faccia superiore ardesiata di MINERAL FLEXTER nelle coperture <strong>con</strong> manto a vista si ottiene un “Cool Roof”, cioé un<br />
“Tetto raffreddato”, la cui faccia esposta all’irradiazione solare raggiunge temperature di soli 40-42°C invece di 75-80°C <strong>delle</strong> impermeabilizzazioni<br />
<strong>con</strong> finitura di colore scuro.<br />
La pittura WHITE REFLEX ottiene performance superiori rispetto anche ai manti protetti <strong>con</strong> lamina metallica e <strong>con</strong>trariamente a questi<br />
<strong>con</strong>sente un più rapido raffreddamento durante le ore notturne.<br />
Tetto <strong>con</strong><br />
WHITE REFLEX<br />
SRI: ≥100%<br />
Emissività: >0,90<br />
Riflettività<br />
Riflettività<br />
>0,80 Riflettività<br />
0,4-0,45<br />
0,80<br />
Membrana verniciata alluminio 0,90<br />
Solar Reflectance <strong>Index</strong><br />
SRI>100<br />
WHITE REFLEX<br />
WHITE REFLEX è una pittura bianca monocomponente, a base di polimeri in emulsione acquosa e<br />
additivi speciali. Il film asciutto forma un film flessibile, resistente agli agenti atmosferici, ad alta riflettività<br />
solare ed emissività nell’infrarosso.<br />
WHITE REFLEX è indicato per la protezione <strong>delle</strong> <strong>membrane</strong> bitume-polimero: la finitura bianca e gli<br />
additivi speciali, oltre a prolungare la durata dei manti, ridu<strong>con</strong>o la temperatura, sia sulla superficie<br />
esterna che all’interno dell’edificio. L’elevata riflettività di WHITE REFLEX (0,75) infatti riduce sensibilmente<br />
rispetto ad una superficie scura il calore assorbito dai raggi solari; ne <strong>con</strong>seguono una notevole<br />
diminuzione di temperatura e quindi un <strong>con</strong>sistente risparmio energetico per il <strong>con</strong>dizionamento degli<br />
edifici. L’alta emissività all’infrarosso (>0,85) favorisce la dissipazione del calore accumulato nelle ore<br />
notturne. Può essere applicato anche su intonaci e superfici in cls. Inoltre la riduzione della temperatura<br />
e la luce diffusa aumentano l’efficienza dei pannelli fotovoltaici. Il rendimento dei pannelli infatti si riduce<br />
del 5% circa ogni 0,5°C di scostamento dai 25°C (temperatura a cui si ha il massimo rendimento).<br />
La verniciatura <strong>delle</strong> coperture <strong>con</strong> WHITE REFLEX permette di raggiungere un valore di SRI (Solar<br />
Reflectance <strong>Index</strong>) pari a 92, e quindi di ottenere crediti LEED per la riduzione dell’effetto isola di calore.<br />
WHITE REFLEX<br />
I<br />
• CAMPI D’IMPIEGO.<br />
è <strong>con</strong>sigliato per impermeabilizzare muri di fondazione in calcestruzzo.<br />
• MODALITÁ D’IMPIEGO.<br />
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le<br />
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e<br />
secche, è <strong>con</strong>sigliabile la stesura una mano di diluita al 30% <strong>con</strong> acqua. va<br />
mescolato prima dell’uso <strong>con</strong> trapani mmani di prodotto. Non eccedere nel <strong>con</strong>sumo<br />
per mano per non l’evaporazione dell’acqua <strong>con</strong>tenuta nel prodotto applicato.<br />
• CONSUMI.<br />
0,500 kg/m 2 per mano.<br />
GB<br />
• APPLICATIONS.<br />
is recommended to waterproof foundations walls made in <strong>con</strong>crete.<br />
• DIRECTIONS.<br />
The surface to be treated has to be dry, clean and with no detaching parts. Weak<br />
parts have to be eliminated and replaced with new material. In order to improve<br />
the adhesive onto porous and dry surfaces, it is recommended to previously spread<br />
a first layer <strong>con</strong>sisting in a 30% water-diluted . has to be mixed before use with<br />
mechanic drills. Application can be made with brushes, rollers or spraying devices.<br />
• CONSUMPTION.<br />
0.5 kg/square metre/year.<br />
D<br />
• APPLICATIONS.<br />
is recommended to waterproof foundations walls made in <strong>con</strong>crete.<br />
• DIRECTIONS.<br />
The surface to be treated has to be dry, clean and with no detaching parts. Weak<br />
parts have to be eliminated and replaced with new material. In order to improve<br />
the adhesive onto porous and dry surfaces, it is recommended to previously spread<br />
a first layer <strong>con</strong>sisting in a 30% water-diluted . has to be mixed before use with<br />
mechanic drills. Application can be made with brushes, rollers or spraying devices.<br />
• CONSUMPTION.<br />
0.5 kg/square metre/year.<br />
F<br />
• APPLICATIONS.<br />
is recommended to waterproof foundations walls made in <strong>con</strong>crete.<br />
• DIRECTIONS.<br />
The surface to be treated has to be dry, clean and with no detaching parts. Weak<br />
parts have to be eliminated and replaced with new material. In order to improve<br />
the adhesive onto porous and dry surfaces, it is recommended to previously spread<br />
a first layer <strong>con</strong>sisting in a 30% water-diluted . has to be mixed before use with<br />
mechanic drills. Application can be made with brushes, rollers or spraying devices.<br />
• CONSUMPTION.<br />
0.5 kg/square metre/year.<br />
NL<br />
• APPLICATIONS.<br />
is recommended to waterproof foundations walls made in <strong>con</strong>crete.<br />
• DIRECTIONS.<br />
The surface to be treated has to be dry, clean and with no detaching parts. Weak<br />
parts have to be eliminated and replaced with new material. In order to improve<br />
the adhesive onto porous and dry surfaces, it is recommended to previously spread<br />
a first layer <strong>con</strong>sisting in a 30% water-diluted . has to be mixed before use with<br />
mechanic drills. Application can be made with brushes, rollers or spraying devices.<br />
• CONSUMPTION.<br />
0.5 kg/square metre/year.<br />
RAPPORTO DI PROVA<br />
Rapporto di prova della riflettività solare<br />
Dipartimento di Ingegneria Meccanica e Civile<br />
Università di Modena e Reggio Emilia<br />
10 GUIDA ALLA POSA DELLE MEMBRANE CON ADESIVO A FREDDO