BBY180 - Makita

clockwise to make sure chain fixed well. During
adjustment, if the chain is fixed too tight, please turn
the nut counterclockwise and push the rear wheel
forward.
For European countries only
EC DECLARATION OF CONFORMITY
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Motor-assisted bicycle
Model No./ Type: BBY180
are of series production and
Conforms to the following European Directives:
2004/108/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN55014-1: 2006, EN15194: 2009,
EN61000-3-2: 2006, EN61000-3-3: 2008,
EN55014-2/A2: 2008, IEC61000-4-2: 2008,
IEC61000-4-3: 2006, IEC61000-4-4: 2004,
IEC61000-4-5: 2005, IEC61000-4-6: 2006,
IEC61000-4-11: 2004
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
15. 7. 2010
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
If there are any parts needed to be adjusted, fix the
screw and other parts tightly according to the
requirements below. (Fig. 21)
Parts Standardtwist Remarks
Locknut 14 – 18 N.m. The press sticker cannot show out
Stem 20 – 25 N.m. The safety line of stem cannot be seen
Seat screw 18 – 20 N.m. The safety line of seat post cannot be seen
Seat and fix the seat parts 18 – 22 N.m.
Hub 30 – 35 N.m.
Hub nut 35 – 40 N.m.
Pedal 18 – 20 N.m.
Handlebar 18 – 20 N.m.
The following standards are used for safety:
EN14764: 2005, EN15194: 2009
9