SEP 40

SELFTEST AND CALIBRATION
grifo ® ITALIAN TECHNOLOGY
If you feel that your programmer does not react according to your expectation, please run the
programmer selftest using Diagnostic POD, enclosed with the standard delivery package. For
optimal results with programmer we recommend you undertake every 6 months, an extended test and
to check the calibration. See instructions for selftest in the Diagnostics menu of PG4UW.
INSTALLING PROGRAMMER SOFTWARE
The programmer package contains a mini-CD with the control program, useful utilities and
additional information. Differences and modifications to this manual (if they exist) may be found in
README_P.TXT file.
MINIMAL PC CONFIGURATION
- PC AT 10 MHz (DOS-version software), PC 486 (WIN-version software)
- 512 kB free RAM (DOS-version software), 16MB free RAM (WIN-version software)
- One CD drive
- HDD, 5 MB free space
- Operating system MS/PC-DOS version 3.2 or later, WIN 3.xx, WIN95/98
- One free printer port with nothing attached
RECOMMENDED PC CONFIGURATION
- Pentium PC 100Mhz or higher
- 32 MB free RAM
- One CD drive
- HDD with minimum 10 MB free space
- Operating system: MS Windows 95/98/ME/NT/2000/XP
- One free bi-directional printer port on PCI Bus, IEEE 1284 or fully compatible
SOFTWARE INSTALLATION
WINDOWS 95/98/ME/NT/2000/XP
Insert delivered mini-CD to your CD drive and instal program starts automatically.
Install program (setup.exe), which will guide you through the installation process and which will do
all the necessary steps before you can first run the control program.
DOS
Run Install program from CD.
Page 70 SEP 40 Rel. 3.10