SEP 40

ITALIAN TECHNOLOGY grifo ®
Insert checksum: This is special item used for select which kind of checksum will be written into
the buffer when, the Calculate & insert was executed.
Insert address: This is special item that specifies an address from the buffer where a result of
chosen checksum will be written, when the Calculate & insert was executed. Address can not
be specified inside the range to . Address is defined as Byte
address.
Size: This item is used for setting a size of chosen checksum result, which will be written into
the buffer. A size of checksum result may be 8 (byte) or 16 (word) bits long. If word size was
selected, whole checksum value will be written into the buffer. In other case will be written only
low byte of checksum value.
Note: If word size was selected, a low byte of checksum value will be written on address specified
in box Insert address and a high byte will be written on address incremented by one.
Calculate: Click on the button Calculate starts calculating checksums for selected block in
buffer. No writes into the buffer are executed.
Calculate & insert: Click on the button Calculate & insert starts calculating checksums for
selected block in the buffer and writes the chosen checksum into the buffer on address specified
by Insert address.
Options
The Options menu contains commands that let you view and change various default settings.
Options / General options
General options dialog allows user to control following options of program.
File options
File options page allows you to set file masks, auto-reload of current file and choose file format
recognizing for loaded files.
File format masks is used for setting file-name masks to use as a filter for file listing in File /
Save and File / Load file window for all file formats. Mask must contain one of wildcards (*, ?)
at least and must be applied correctly by syntax.
Project file default extension is used for setting project files-extension used as default extension
in File / Load project and File / Save project dialogs.
In group When current file is modified by another process can be set mode of reloading of
actually loaded (current) file. There are three choices:
1. Prompt before reloading file
2. Reload automatically
3. Ignore change scanning of current file
Load file format allows to set mode of file format recognition for loading files. When automatic
file format is selected, program analyses format of loading file and test file for each of supported
formats, that are available in program. If file format matches one of supported formats, the file
SEP 40 Rel. 3.10
Page 93