MS-245.4 U/MS-245.4 UE/MS-245.4 C/MS-245.4 CE GB Petrol ...
MS-245.4 U/MS-245.4 UE/MS-245.4 C/MS-245.4 CE GB Petrol ...
MS-245.4 U/MS-245.4 UE/MS-245.4 C/MS-245.4 CE GB Petrol ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CORRECT HANDLING OF MACHINE<br />
Attachment of shoulder strap<br />
– Adjust the strap length so that the cutter blade will be kept parallel with the<br />
ground.<br />
Detachment<br />
For <strong>MS</strong>-<strong>245.4</strong> C, <strong>MS</strong>-<strong>245.4</strong> <strong>CE</strong><br />
– In an emergency, push the notches (1) at both sides, and you can detach the<br />
machine from you.<br />
Be extremely careful to maintain control of the machine at this time. Do not<br />
allow the machine to be deflected toward you or anyone in the work vicinity.<br />
WARNING: Failure to maintain complete control of the machine at all could<br />
result in serious bodily injury or DEATH.<br />
For <strong>MS</strong>-<strong>245.4</strong> U, <strong>MS</strong>-<strong>245.4</strong> <strong>UE</strong><br />
– In case of emergency, remove the emergency detachment lever (2) by pulling<br />
strongly with a finger. The machine sill detach from body.<br />
Be extremely careful to maintain control of the machine at this time. Do not<br />
allow the machine to be deflected toward you or anyone in the work vicinity.<br />
WARNING: Failure to maintain complete control of the machine at all could<br />
result in serious bodily injury or DEATH.<br />
POINTS IN OPERATION AND HOW TO STOP<br />
Observe the applicable accident prevention regulations!<br />
STARTING<br />
Move at least 3 m away from the place of refuelling. Place the <strong>Petrol</strong> Brushcutter on a clean piece of ground taking care that the cutting tool<br />
does not come into contact with the ground or any other objects.<br />
A: Cold start<br />
1) Set this machine on a flat space.<br />
STOP<br />
OPERATION<br />
(1)<br />
Lock-off lever<br />
Throttle lever<br />
1<br />
High speed<br />
Low speed<br />
(1)<br />
Hanger<br />
Hanger<br />
<strong>MS</strong>-<strong>245.4</strong> C<br />
<strong>MS</strong>-<strong>245.4</strong> <strong>CE</strong><br />
(2)<br />
Throttle lever<br />
Low speed<br />
STOP<br />
High speed<br />
(1)<br />
OPERATION<br />
Lock-off lever<br />
<strong>MS</strong>-<strong>245.4</strong> U<br />
<strong>MS</strong>-<strong>245.4</strong> <strong>UE</strong>