You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 GENERAL<br />
This symbol indicates CAUTION.<br />
Serious personal injury and/or damage<br />
to property may result if the<br />
instructions are not followed carefully.<br />
You must read these instructions for use<br />
and the accompanying pamphlet<br />
“SAFETY INSTRUCTIONS”<br />
carefully, before starting up the<br />
machine.<br />
Contaminants must not enter the<br />
hydraulic system or the fuel system.<br />
This causes serious damage to<br />
components of the systems.<br />
1.1 SYMBOLS<br />
The following symbols appear on the machine.<br />
They are there to remind you of the care and attention<br />
required during use and maintenance.<br />
This is what the symbols mean:<br />
Caution!<br />
Read the instruction manual and the safety<br />
manual before using the machine.<br />
Caution!<br />
Watch out for discarded objects. Keep onlookers<br />
away.<br />
Caution!<br />
Always wear hearing protectors.<br />
Caution!<br />
The machine, equipped with original accessories,<br />
must not be driven in any direction<br />
on slopes with a gradient greater than<br />
10º.<br />
Caution!<br />
Risk of crushing injuries. Keep all body<br />
parts away from the articulated steering<br />
when the engine is running.<br />
Caution!<br />
Risk of burn injuries. Do not touch the silencer/catalytic<br />
converter.<br />
1.2 References<br />
1.2.1 Figures<br />
The figures in these instructions for use are numbered<br />
1, 2, 3, etc.<br />
Components shown in the figures are marked A, B,<br />
C, etc.<br />
A reference to component C in figure 2 is written<br />
“2:C”.<br />
ENGLISH GB<br />
1.2.2 Headings<br />
The headings in these instructions for use are numbered<br />
in accordance with the following example:<br />
“1.3.1 General safety checks” is a subheading to<br />
“1.3 Safety checks” and is included under this<br />
heading.<br />
When referring to headings, only the number of the<br />
heading is normally specified. E.g. “See 1.3.1”.<br />
1.3 Abbreviations<br />
Abbreviations are used in these instructions for<br />
use. Their meanings are given in the table below:<br />
Abbre- Meaning<br />
viation<br />
PTO Output for driving front mounted<br />
accessory.<br />
PTO1 Control for operation of output for<br />
driving front mounted accessory.<br />
F Implement lifter<br />
F1 Control for operating the implement<br />
lifter.<br />
L Output for auxiliary functions on front<br />
mounted accessory. See fig. 1.<br />
L1 Control for operating L.<br />
R Output for auxiliary functions on front<br />
mounted accessory. See fig. 1.<br />
Re Output for auxiliary functions on rear<br />
mounted accessory. See fig. 5.<br />
R1 Control for operating R and Re<br />
2 TECHNICAL DATA<br />
2.1 Machine data<br />
Data Titan 20 B 26 B 26 H 32 H<br />
Engine output,<br />
kW<br />
Drive PTO Belt Belt<br />
14,7 19,3 19,3 23,5<br />
Hydraulics<br />
Hydrau<br />
lics<br />
Speed, km/h 0-20 0-20 0-20 0-24<br />
Weight, kg 590 600 610 625<br />
Engine oil,<br />
volume<br />
2.8<br />
litres<br />
3.4 litres<br />
3.6<br />
litres<br />
Engine oil,<br />
grade<br />
See “5.3”<br />
Hydraulic oil 20 litres SAE 10W-30<br />
Oil<br />
4x0,08-0,09 litres GL4/5 75W-90<br />
wheel motors<br />
Ambient<br />
temperature<br />
Down to -20°C.<br />
Fuel Diesel (EN590:96)<br />
Tank volume 42 litres<br />
75