FA-5107 - Weltbild.pl

ENGLISH
DANGER – TO REDUCE THE RISK OF ELECTROCUTION:
1. Always unplug this appliance immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub of sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for an appliance that has fallen into water. Unplug immediately.
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE OF INJURY TO PERSONS:
1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or invalids.
3. Use this appliance only for its intended household use as described in this manual. Do not use attachments
not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly. If it has been
dropped or damaged or dropped into water. Return the appliance to a Service Center for examination
and repair.
5. Keep the cord away from heated surfaces.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where
the air openings may be blocked. Keep the air openings free of lint, hair etc.
7. Never use while sleeping.
8. Never drop or insert any object into any opening and hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being
administered.
10. Do not direct hot air toward eyes or other heat sensitive areas.
11. Attachements may be hot during use. Allow them to cool before handling.
12. Do not use near tubs, basins or other vessels containing water.
SPECIFICATIONS:
115/230V • 50/60Hz • 450W
3. STEAM IRON
PRODUCT DESCRIPTION
1. Power cord
2. Spray button
3. Water filling inlet
4. Watertank
5. Spray nozzle
6. Steam control
7. Temperatur control
8. Indication light
9. Release button (press to move grip sidewards)
10. Voltage selector
FUNCTION AND FEATURES
The travel steam iron is a new product, which combines dry and steam ironing. The unique design makes
this iron ideal for travelling. This unit also substitutes dual voltage (worldwide compatible)
SECURITY INSTRUCTIONS
1. Read the instruments manual carefully before operating this appliance.
2. This product is used for ironing clothes.
3. Please check if the power cord, plug, socket and iron are in good order, if broken, stop using immidiately
and make it repaired at an authorized service-station.
4. Don’t immerse iron into water or other liquids to avoid leakage.
5. Please keep the iron out of reach of children, and if turned on never leave it unsupervised to avoid any
danger.
6. Don’t plug in the unit before pouring water in or out.
7. Keep the power cord away from the hot soleplate to avoid damage.
8. Always if check the voltage selector is the same as the local voltage level.
9. After ironing, unplug the unit, turn off the steam and temperature button and place it upright.
4
ATTENTION:
1. Do not use more than two electrical appliances with big power consumption in one circuit at the same
time to avoid overloading.
2. Do not use power cord more than 10A for extension.
PREPERATION BEFORE USE:
1. Clean the soleplate and the steam holes.
2. Filling water (See diagram 7)
3. Learn function of thermostat (See diagram 3)
4. Flatten clothes before ironing (See diagram 4)
FILLING THE WATER TANK
1. Unplug the iron (See diagram 1)
2. Put the steam switch to “0” postion, and stand the handle upright. (See diagram 5/6)
3. Open the rubber lid and fill up to the maximum level “MAX” of the water tank. (See diagram 7)
Note: Always empty the water tank after use. (See diagram 8)
INSTRUCTIONS FOR DRY IRONING:
1. Choose the voltage neccesary for the local area.
(See Diagram 16-17 to choose the right voltage level)
Warning: Adjust the correct votage before plugging the unit.
2. Plug in the unit and close the steam switch.
3. Adjust temperature scale according to the fiber you are ironing.
4. Lift the spray button continously to spray water on the clothes or ironing.
5. Start ironing after indication light turns off (the soleplate is heated).
6. Close the thermostat and unplug the after use.
INSTRUCTIONS FOR STEAM IRONING:
1. Choose the voltage neccesary for the local area. (See Diagram 16-17 to choose the right voltage level)
Warning: Adjust the correct votage before plugging the unit.
2. Plug in the unit and set to steam function.
3. Adjust temperature scale to max position and heat the unit.
(See Diagram 12)
4. After the indication light turned off, set the the steam button to “ ” position. (See Diagram 13)
5. Start ironing shortly after the steam burst. (See Diagram 14)
6. Close the thermostat and unplug the unit the after use.
CLEANING AND MAINTENACE:
1. Fill water to half position of tank and put the iron on holder.
2. Choose the voltage neccesary for the local area. (See Diagram 16-17 to choose the right voltage level)
Warning: Adjust the correct votage before plugging the unit.
3. Plug the unit and set the thermostat scale to max. position.
4. The indication light will turn off as soon the unit has reached the desired heat.
5. Unplug and set the the steam button to “0” position. The steam burst wil clean unit and wait until the water
is completly evaporated.
6. Close the steam button and heat the iron.
7. Iron an old cloth, until the iron is completly dry. (water tank empty)
8. Close the thermostat control and unplug the appliance.
9. Cool down the iron and clean it with a soft damp cloth.
10. Press release button and tilt the handgrip 90 degrees.
SPECIFICATIONS:
115/230V • 50/60Hz • 700W
M_5107_v02.indd 4-5 4/3/09 3:30:44 PM
5
ENGLISH