PURE POLYUREA - Tecnopol

PROTETTIVO E IMPERMEABILE MEMBRANA LIQUIDA | LIQUID MEMBRANE, WATERPROOF AND PROTECTIVE
DESCRIPTION
TECNOCOAT PRIMER - PU is a polyurethane primer
of 2 components with low viscosity. Specially it is
designed to increase the adhesion of the TECNOPOL
systems (polyurea polyurethane) in porous and
nonporous supports like concrete, Asphalt laminate of
PVC,
ADVANTAJES
100% solids eliminating emissions (zero VOC)
Excellent adhesion on most of surfaces.
Without solvent, it can be used in zones little
ventilated.
Drying even to low temperatures.
Repellent of the water.
It is possible to be applied on humid supports.
It can be loaded with solids for filled up of
irregularities.
No inflammable (VOC Zero)
Great adhesion in porous supports.
Under consumption due to the low viscosity, which
improves the satisfaction of our clients.
APLICATION
It requires smooth, clean, dry the support and
hardest possible.
It can be applied to roller, it broaches or pistol
airless.
The approximate consumption is of 0,200kg/m2.
The masking time it is approximately of 1-3 hours.
Potlife: 45 min to 60min
Repaint : 24 and even 48 hours
TECNOCOAT PRIMER-PU
SUPPORTS
Concrete, asphalt laminate, wood…
PRESENTATION
Data Sheet
In packages of 5 and 25 kg each component.
COLORS
Colour less
STABILITY OF the PACKAGE
6 months to a temperature of 5 ºC to 25 ºC in situated
dry. If the bucket is opened it must be used immediately.
CLEANNING
The cleaning of the materials is made with dissolvent
Desmopol Solvent.
TRANSPORT AND STORAGE
View our Safety data sheet
PURE POLYUREA
31