Micromotore da laboratorio Blue Sky - Carlo De Giorgi

,167$//$7,21
ÃÃÃÃÃ
326,7,21,1*
The appliance is supplied assembled and ready for use after connecting
the control devices and the micromotor complete with handpiece to the
power supply. The package contains:
a) power supply unit
b) mains cable;
c) micromotor complete with handpiece, equipped with 2.35 mm ∅ collet;
d) footpedal (bench top version only);
e) rubber base;
f) user instructions.
The appliance can be moved by hand without requiring lifting devices.
&211(&7,216 $1' 3/$&,1* ,172 6(59,&(
With reference to Figure 1, for bench-top models, and Figure 2 for floor
types, after positioning the appliance and checking that the main power
switch (1) is set to OFF, make the following connections:
- footpedal (2) to connector (3) on the rear of the appliance (bench-top
model only);
- micromotor complete with handpiece (4) to connector (5) on the front
of the appliance (on the rear in the case of floor versions – see Fig. 2);
- mains power cable to connector (9), inserting the plug into a socket
outlet of the mains circuit, which must be equipped with overcurrent
protection.
)LJ EHQFK WRS PRGHO
ÃÃÃÃ ÃÃÃ