Micromotore da studio Studio micromotor - Carlo De Giorgi
Micromotore da studio Studio micromotor - Carlo De Giorgi
Micromotore da studio Studio micromotor - Carlo De Giorgi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STUDIO MICROMOTOR<br />
4 - MICROMOTORS 540/00 - 541/00<br />
4.1 - INSTALLATION<br />
4.1.1 - POSITIONING<br />
The appliance is supplied assembled and ready for use after connecting the<br />
control devices and the <strong>micromotor</strong> complete with handpiece to the power<br />
supply.<br />
The package contains:<br />
a) battery power pack complete with mains charging cable;<br />
b) <strong>micromotor</strong> complete with Intra type attachment (model 540/00 only);<br />
c) <strong>micromotor</strong> complete with handset and ∅ 2.35 mm collet (model 541/00 only);<br />
d) rubber base;<br />
e) user instructions.<br />
6 2 3 4<br />
5<br />
Fig. 3<br />
4.1.2 - CONNECTIONS AND PLACING INTO SERVICE<br />
After the appliance has been correctly positioned and the main power<br />
switch set to OFF (1 - Fig. 3), connect the <strong>micromotor</strong> to socket (2) by<br />
inserting the connector and then turning the locking ring without overtightening.<br />
<strong>Carlo</strong> de <strong>Giorgi</strong> GB - 11<br />
1
Change language