KM 80 W P - Karcher

KM 80 W P - Karcher KM 80 W P - Karcher

27.04.2013 Views

Fault Remedy Engine does not start Reduced motor output Engine is too hot Have the carburettor adjusted. Fill in motor oil Engine is running but machine is not moving Troubleshooting Check setting of gas lever Refuel Open fuel cock Drain bad or old fuel from the tank and the carburettor, fill in fresh fuel Check and clean spark plug, replace if necessary. Check air filter, clean if required. Check bowden cable to the motor Inform Kärcher Customer Service. Adjust the Bowden cable of the acceleration drive Inform Kärcher Customer Service. Machine is not sweeping properly Check roller brush for wear, replace if necessary. Lower or raise the roller brush by means of the height adjustment Readjust Bowden cable of the sweeping drive Inform Kärcher Customer Service. Technical specifications Machine data Length x width x height (pushing handle unfolded) mm 1410 x 800 x 1060 Length x width x height (pushing handle folded in) mm 880 x 800 x 770 Net weight (transport weight) kg 70 Driving and sweeping speed km/h 2,1 Climbing capability (max.) % 12 Climbing ability with attachments (max.) % 2 Roller brush diameter mm 300 Working width mm 800 Engine Type -- Honda, GCV 135E 1 cyl., four-stroke Cylinder capacity cm 3 135 Max. speed 1/min 2860 ±10 Minimum speed 1/min 1700 ±10 Max. power kW/PS 2,6/3,5 Fuel type Petrol, unleaded Fuel tank capacity l 0,77 Spark plug, NGK -- BPR 6 ES Oil grades Engine oil - type SAE 10W30 Filling quantity l 0,55 Tyres Drive wheel -- 4.00-4 Tyre pressure bar / MPa 1,8 / 0,18 Working conditions Temperature °C -5 and +40 Air humidity, non-condensing % 0 - 90 Values determined as per EN 60335-2-72 Noise emission Sound pressure level L pA dB(A) 84 Uncertainty K pA dB(A) 3 Sound power level L WA + Uncertainty K WA dB(A) 101 Machine vibrations Hand-arm vibration value m/s 2 < 2,5 Uncertainty K m/s 2 0,2 Subject to technical modifications! 14 EN - 6

EC Declaration of Conformity We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. Product: Sweeper Type: 1.335-xxx Relevant EU Directives 2006/42/EC (+2009/127/EC) 2004/108/EC 2000/14/EC Applied harmonized standards EN 55012: 2007 + A1: 2009 EN 61000–6–2: 2005 EN 60335–1 EN 60335–2–29 EN 60335–2–72 EN 61000–3–2: 2006 + A2: 2009 EN 61000–3–3: 2008 EN 62233: 2008 Applied conformity evaluation method 2000/14/EC: Appendix V Sound power level dB(A) Measured: 98 Guaranteed: 101 The undersigned act on behalf and under the power of attorney of the company management. CEO Head of Approbation Authorised Documentation Representative S. Reiser Alfred Kärcher GmbH Co. KG Alfred-Kärcher-Str. 28 - 40 71364 Winnenden (Germany) Phone: +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2012/07/01 Accessories Ex factory, the sweeper is equipped with a roller brush that is suitable for summer and winter operation. For collecting the dirt a waste container is available (special accessory order no. 2.851-447.0). This is hooked into the application points and secured with 2 spring cotters. A snow removal shield is available for removing snow (special accessory order no. 2.851-446.0). It is hooked into the application points and secured with 2 spring cotters. EN - 7 15

EC Declaration of Conformity<br />

We hereby declare that the machine described<br />

below complies with the relevant<br />

basic safety and health requirements of the<br />

EU Directives, both in its basic design and<br />

construction as well as in the version put<br />

into circulation by us. This declaration shall<br />

cease to be valid if the machine is modified<br />

without our prior approval.<br />

Product: Sweeper<br />

Type: 1.335-xxx<br />

Relevant EU Directives<br />

2006/42/EC (+2009/127/EC)<br />

2004/108/EC<br />

2000/14/EC<br />

Applied harmonized standards<br />

EN 55012: 2007 + A1: 2009<br />

EN 61000–6–2: 2005<br />

EN 60335–1<br />

EN 60335–2–29<br />

EN 60335–2–72<br />

EN 61000–3–2: 2006 + A2: 2009<br />

EN 61000–3–3: 2008<br />

EN 62233: 2008<br />

Applied conformity evaluation method<br />

2000/14/EC: Appendix V<br />

Sound power level dB(A)<br />

Measured: 98<br />

Guaranteed: 101<br />

The undersigned act on behalf and under<br />

the power of attorney of the company management.<br />

CEO Head of Approbation<br />

Authorised Documentation Representative<br />

S. Reiser<br />

Alfred Kärcher GmbH Co. KG<br />

Alfred-Kärcher-Str. 28 - 40<br />

71364 Winnenden (Germany)<br />

Phone: +49 7195 14-0<br />

Fax: +49 7195 14-2212<br />

Winnenden, 2012/07/01<br />

Accessories<br />

Ex factory, the sweeper is equipped with a<br />

roller brush that is suitable for summer and<br />

winter operation.<br />

For collecting the dirt a waste container is<br />

available (special accessory order no.<br />

2.851-447.0). This is hooked into the application<br />

points and secured with 2 spring cotters.<br />

A snow removal shield is available for removing<br />

snow (special accessory order no.<br />

2.851-446.0). It is hooked into the application<br />

points and secured with 2 spring cotters.<br />

EN<br />

- 7<br />

15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!