CULTURE Pyrogravure-Pointillisme Pyrography-Pointillism À CHAUD HOT OFF THE MARK Artisanat Crafts La pyrogravure, l'art de décorer le bois à main levée avec des marques de brûlure, est à la fois un art et un artisanat à Madagascar. I l y a des portraits, des paysages et des scènes représentées comme de l'art ainsi que des objets plus artisanaux tels que des porte-clés et des bijoux. Tous sont produits par la technique de la pyrogravure-pointillisme: des pointillées qui forment une image, de la pyrogravure sur bois. Le support, qui n’est autre que du bois ordinaire à l’état brut, est préparé après séchage et polissage. Parfois, certains artistes récupèrent de temps en temps des restes de bois: un geste écologique qui donne des œuvres authentiques et uniques. Quant au motif, le pyrograveur ne suit que son inspiration pour arriver à son but. Il cherche d’abord un sujet, puis réalise une esquisse, et joue enfin et surtout avec l’ombre et la lumière. Savoir utiliser cet outil à la pointe brûlante n’est pas assez pour devenir pyrograveur, il faut aussi du talent et savoir maîtriser la température pour que le bois ne noircisse pas trop vite et ne fume pas. Dans le cas contraire, la pointe ne marquera pas assez le bois. Zo Ramasindraibe, artiste plasticien depuis 20 ans et pyrograveur depuis une année: “Le sujet ou l’environnement à reproduire m’aide à définir comment je vais procéder, ensuite viennent les matières. Souvent, je commence par des points et puis cela évolue en traits; les couleurs constituent un plus”. En cas d’erreur, plutôt que d’abandonner son oeuvre, il fait appel à son imagination et cela donne des résultats surprenants sur des tableaux allant de 20x20cm à 50x60cm. Pyrography, the freehand art of decorating wood with burn marks is both an art and a craft in Madagascar. There are portraits, landscapes and scenes depicted as art as well as more craft objects such as key rings and jewellery. All are produced by the technique of pyrography-pointillism: dotted lines that form an image, pyrography on wood. The basis, which is nothing other than ordinary wood in its raw state, is prepared after drying and polishing. Sometimes, artists recycle wood scraps; an ecological gesture that creates authentic and unique works of art. As for the motif, the pyrograver follows his inspiration. He first looks for a subject, then makes a sketch and finally plays with light and shadow. Knowing how to use a burning point tool is not enough to become a pyrograver, you also need talent and know how to control the temperature so that the wood does not blacken too quickly or smoke. Otherwise, the tip will not mark the wood enough. Zo Ramasindraibe, a visual artist for 20 years and a pyrographer for a year says, "The subject or environment to be reproduced helps me to define how I'm going to proceed, then come the materials. Often, I start with dots and then it evolves into lines; colours are a plus”. In the event of an error, rather than abandoning his work, he uses his imagination and this gives some surprising results for his artworks ranging from 20x20cm to 50x60cm in size. | 38 | <strong>Magazine</strong> online www.primemedia.international
www.floribis.com Service clientèle +261 32 05 819 35 / 32 11 347 32 · relation@floribis-mg.com Boutique Floribis Route de l’aéroport Ivato Lot IVF Fitroafana Talatamaty 105 Tananarive Madagascar SAKATIA