Prestige - Hansgrohe

Automatic shower function
switch-off time.
(Determines the time after
which the control returns to
"stand-by" mode.)
Press the + ( ) button to
start the next program item
PO3. Press the Mode ( )
button: The value 15 min appears.
Use the +/- ( and
) buttons to set the value
within the 1 to 50 minutes
limits. Press the Mode ( )
button to save the setting.
The display shows: PO3
Automatic lighting
switch-off
(The time after which the
shower lighting automatically
switches off. Starts after all
the showers have been turned
off.)
Press the + ( ) button to
display the next program item
PO4. Press the Mode ( )
button: The value 2 min appears.
Use the +/- ( and
) buttons to set the value
within the 1 to 50 minutes
limits. Press the Mode ( )
button to save the setting.
The display shows: PO4
Configuration code
(Provides the service technician
with informaion about
the connected devices. Cannot
be changed.)
Press the + ( ) button to
start the next program item
PO5. Press the Mode ( )
button: The three digit
configuration code appears.
Comfort Electronics K4,
Operation, Maintenance, Troubleshooting
Software code
(Provides the service technician
with information about
the software used. Cannot be
changed.)
Press the + ( ) button to
display the next program item
PO6. Press the Mode ( )
button: The three digit software
code appears.
Characteristic curve
(Serves to determine the characteristic
curv.)
Press the + ( ) button to
display the nex progrm item
PO7. Press the Mode ( )
button: The value 1 appears.
Use the +/- ( or ) buttons
to set the value to:
0 = (No) or 1 = (Yes).
Press the Mode (
to save the setting.
) button
The display shows: P07
35
Français English Deutsch