Prestige - Hansgrohe

Comfort Electronics K4,
Operation, Maintenance, Troubleshooting
34
Program items
(Factory settings)
retrieve/change
Upper reset limit
Starting the program menu:
Press the >42° ( ) and
Light ( ) buttons for at
least 5 seconds until PAr appears
on the display. Now
press the Mode ( ) button.
The display now shows
P00. Press the Mode ( )
button again to display the
value 42°C. Now use the +/buttons
to adjust the value
within the 32°C to 42°C limits.
Press the Mode ( ) button
to save the setting. The
display shows P00.
The upper and lower reset limits
determine the permissible
range for the initial shower
temperature. The system sets
the temperature for the next
shower to 39°C when the temperature
is outside this range
when the Shower Panel is
switched off. The temperature
is freely selectable during a
shower.
Lower reset limit
Press the + ( ) button to
start the next program item
PO1. Press the Mode ( )
button: The value 32°C appears.
Use the +/- ( and
) buttons to set the value
within the 10°C to 32°C limits.
Press the Mode ( )
button to save the setting.
The display shows: PO1
Upper setting limit
The upper setting limit is the
highest tempeature that can
be selected during a shower.
Press the + ( ) button to
start the next program item
PO2. Press the Mode ( )
button: The value 55°C appears.
Use the +/- ( and
) buttons to set the value
within the 40°C to 60°C limits.
Press the Mode ( )
button to save the setting.
The display shows: PO2