Prestige - Hansgrohe

Taking a shower
The system is in "sleep" mode
(OFF). This is indicated by a
dot flashing in the display.
Pressing any button switches
the system to "stand-by" mode
(ready for use).
The display now has background
lighting and the
buttons have dimmed background
lighting. The control is
ready for operation.
One or two different shower
types can now be activated.
The buttons have bright background
lighting. Dark buttons
cannot be selected. Pressing
an active button resets this
button and a different shower
type can then be selected.
Examples of shower
type combinations:
Example 1: ,
Overhead and body showers
Example 2: ,
Hand and body showers
Example 3: ,
Overhead and hand shower
Setting the temperature
Use the +/- ( and )
buttons to st the temperature.
For temperatures above 42°C
(protection against scalding):
Press the + ( ) and >42°
buttons ( ) simultaneously.
Pressing the Mode ( )
button again: Return to
temperature setting >42°.
Protection against
scalding:
Protection against scalding
hinders setting temperatures
above 42°C.
Comfort Electronics K4,
Operation, Maintenance, Troubleshooting
Hydromassage
(cascade)
First activate the Body shower
( ) button. Then press the
Hydromassage ( ) button.
Upper and lower body
shower pairs are switched
parallel. Cascade switches
automatically between these
4 showers and the middle
body showers.
Note: Varying temperatures
during hydromassage
improve the stimulation effect
on your circulation.
Press the Mode ( ) button
to change the interval.
The word "Pulse" appears in
the display followed by a
number. This number is the interval
in seconds. The +/- (
and ) buttons can be used
to set the interval to
1 – 50 seconds.
33
Français English Deutsch