BARNVIEW1 - ASA Electronics

Antenna Installation3dBi Antenna5dBi AntennaSetting the Camera Channel (optional)The wireless camera is supplied preset to channel 1.The monitor supports up to 4 cameras. Follow the steps below in Camera Setup section tosetup or change the monitor channel of the camera. If you are adding another camera tolink with the supplied monitor in this kit, then ensure its channel is set to a differentchannel to the existing camera(s).Pairing the Camera to Receiver (optional)Follow the steps in Camera Setup section to setup or change the channel of the camera. Ifyou are adding another camera to link with the supplied monitor in this kit, then ensure itschannel is set to a different channel to the existing camera(s).