120W + + + - Cbe

GBSOLAR REGULATOR P262-2REGULATOR FOR SOLAR MODULESMod. P 262 - 2by123CHARGEBATT. OKALARMCHECKLEDCHECKPANEL4 5S O L A R 1 2 0 WI N P U T 0 - 3 0 VO U T P U T 1 4 , 2 VINPUT 12Vcc 0,1mA12V+MAX 60W + MAX 60W++Made in ItalyIt's expressly designed to control the 12V batteries charge through solar panels.SPECIFICATIONSTECHNICAL DATA1)2)3)4)5)Yellow LED indicating the correct rechargeoperation.Green LED indicating the optimum charge ofthe battery.Red LED indicating any polarity inversion ofthe battery or the solar panels.NB: Yellow and green LEDs out indicate thepoor lighting of the solar panel (e.g. thevehicle is indoor).It is usually any alternating of the green andyellow LEDs.Prearranged connector for led test panelconnection.Prearranged red connector for display testpanel Mod. PT442 connection ( 9).Tensione nominale 12V.Nominal voltage 12V.Full-charge termination :- Charge disconnection : 14,4V.- Charge reconnection : 13,8V.Typical consumption 0,1mA 12V.Serial Mosfet control.Schottky diodes.Max power applicable 120W.Short circuit and polarity inversion protected.10A battery fuse.Prearranged for test panels connection.Prearranged for two solar panels in parallelconnection.Dimensions: mm 105x95 H403