Duceragold - DeguDent

26 I 27 General instructions Duceragold Kiss28 Shade conversion chart/Instructions for use29 Instructions for use30 General recommendations for firingGBRelease date: September 2006Duceragold ® KissIndications for use• Duceragold Kiss is a ceramic material suitable forveneering metal copings and frameworks for singlecrowns and bridges with a coefficient of thermalexpansion (CTE) of 16,2 –17.1 µm/m·K (25–600°C)and for veneering the Cergo pressable frameworkclass ceramic.• For dental use onlyContraindications• Suitable only for the indications listed aboveWarningsUndesired side effects of these medical productsare extremely rarely to be expected with properprocessing and application. Immunoreactions(e.g. allergies) and/or local unpleasant perceptions(e.g. taste irritations or oral mucosa irritations), however,cannot completely be excluded on principle.If you know any undesirable side effects – also indoubtful cases –, then please communicate themto us.In case of hypersensitivity of the patients againstDuceragold Kiss veneering porcelain or one of theingredients, this medical product must not be usedor only used under strict supervision by the treatingphysician/dentist.Known cross-reactions or interactions of themedical product with other medical products ormaterials existing in the mouth must be takeninto account by the physician/dentist when usingthe medical product.Please pass on all the above-mentioned informationto the treating physician/dentist, when processingthis medical product for an individually manufacturedobject. Notify the dentist or physician in charge ofall factors described above if you use this medicalproduct for a custom construction.• Do not inhale abrasive dusts• Pastes and paste fluid are harmful if swallowed(R 22).PrecautionsWhen working with these materials, make sureto comply with the Instructions for Use and thepertinent Material Safety Data Sheets (MSDS).Adverse reactionsWe are not aware of any risks and/or side effectsrelated to Duceragold Kiss veneering porcelain.Technical data• CTE dentine: 15,1 µm/m·K (25–500°C)• Dental ceramics, type 1, class 2–8 accordingto DIN EN ISO 6872• Metal-ceramic bond, flexural strength andchemical solubility according to DIN EN ISO 9693• Use only with alloys with a solidus temperature ofat least 900°C.Alloy selection• Duceragold Kiss is compatible with high-gold alloys(such as Degunorm and Degunorm supra/pur).Ask the alloy manufacturer about the alloy’scomposition and coefficient of thermal expansion.If the cooling times are observed, bonding alloyswith a CTE of 16.2–17.1 µm/m·K (25–600°C) can berecommended.Market launch: May 200326