Elektronische Ofensteuerung OEC Olsberg Efficiency Controller
Elektronische Ofensteuerung OEC Olsberg Efficiency Controller
Elektronische Ofensteuerung OEC Olsberg Efficiency Controller
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Screw on the door contact switch behind the<br />
furnace chamber door on the right side.<br />
First, push the connection cable through the installation<br />
opening.<br />
Door contact switch<br />
• After the installation, check to make sure that the<br />
door contact switch works perfectly when the furnace<br />
chamber door is closed.<br />
→ The furnace chamber door must close per<br />
fectly<br />
→ The door contact switch must click<br />
audibly when the door is opened<br />
→ If necessary, adjust the depth of the<br />
door contact switch<br />
• Push the temperature sensor into the sensor<br />
pocket on top of the heating jacket and screw<br />
tight with the sensor sleeve and the union nut.<br />
• Connect the sensor cableto the back of the unit<br />
down to the wood storage compartment.<br />
Union nut Sensor sleeve<br />
temperature sensor:<br />
• Push the cable of the power supply through the<br />
grommet in the back wall at the bottom.<br />
• Pull the power supply cable and sensor cable<br />
through the recesses in the metal cover into the<br />
wood storage compartment.<br />
Power supply cable Sensor cable<br />
• Plug in all connecting cables between the door<br />
contact switch, electronics and servo motor.<br />
9
Change language