Manuale utente_Owner's manual_Manuel d ... - Husqvarna

CLUTCH LEVER FREE PLAY ADJUSTMENTFree play (A) must be 5 -10 mm (0.196 - 0.39 in).- Move the rubber gaiter (1);- regulate the adjuster screws (2) and the counter adjusterscrew (3) to obtain the indicated free play.- after completing the operation, make sure the counteradjuster screw (3) is properly tightened and then replacethe rubber gaiter (1).SUSPENSIONThe vehicle leaves the factory with standard settings forthe front and rear suspension that meet most requirements.The front fork cannot be regulated in any way. On therear shock absorber, the spring preload and the reboundhydraulic damping can be regulated.SHOCK ABSORBER SPRING PRELOAD ADJUSTMENT- Adjust the ring nut (1) using the spanner provided; byturning left “A”, the preload increases;by turning right “B” the preload decreases.WARNING*: Be careful not to touch hotexhaust pipe while adjusting the shockabsorber.EN1A1321AB1SPECIFICATIONS - OPERATION - MAINTENANCE EN - 33