Manuale utente_Owner's manual_Manuel d ... - Husqvarna

STARTING THE ENGINEON1) Turn key (1) in the ignition switch to ON and waituntil the dashboard CHECK has finished;2) pull clutch lever (2);3) shift gear pedal (3) to neutral;4) check that the throttle control (4) is fully closed.Note*:The engine control unit has a startupstrategy that only works if thethrottle control is fully closed.5) Check that button (5) is in the out position and thenpress the start button (6).6) Release the clutch lever (2).1OFFPUSHN3Note*:A safety switch is mounted on the clutch lever supportthat allows you to start the engine ONLY when the gearboxis in neutral or when the gear is engaged and theclutch lever pulled.There is a switch on the side stand that turns off the enginewhen the clutch is released with the gear engagedand the side stand lowered.24IMPORTANTNEVER START ENGINE WITH BATTERY DIS-CONNECTED FROM CIRCUIT.IMPORTANT NOTE IN CASE OF COLD START AT LOW TEM-PERATURESWe recommend idling for a short time to warm up theengine.This allows oil to reach all points that need lubricatingand coolant to warm up to regular operating temperature.Avoid warming up the engine for too long.56EN - 24SPECIFICATIONS - OPERATION - MAINTENANCE