Manuale utente_Owner's manual_Manuel d ... - Husqvarna

SETTING PARAMETERSWith the dashboard on, press the “S” button (1) to displaythe various display functions:ODO ; TRIP ; TEMP ; CON ; CLOCKCON function:When this function is activated, press the “S” button formore than 4 seconds to reset and start a new count of thelitres/ gallons consumed from when average consumption(L/100 km) has been reset.1The “ODO”, “TEMP” and “CLOCK” functions are for displaypurposes only.TRIP function:When this function is activated, press the “S” button formore than 4 seconds to reset and start a new partialcount of the kilometres /miles subsequently travelled.When this function is set after the fuel reserve light hascome on, press the “S” button “S” (1) for more than 4seconds to display fuel consumption (in litres or gallonsdepending on the unit of measurement you have selected)from when you go onto fuel reserve.1EN - 16SPECIFICATIONS - OPERATION - MAINTENANCE