Pro-Head-Spot

Lamp - Main menu 1• Press [MODE/ENTER] to enter the main menu (display flashing).• Press [UP] or [DN] to select “LAMP”.- Lamp on/offWith this function you can switch the lamp on or off via the Control Board.• Select "OPEN" by pressing [UP] or [DN].• Press [MODE/ENTER], the display shows“ON” or “OFF”.• Press [UP] to select “ON” if you wish to enable this function or [DN] to select “OFF” if you don’t.• Press [MODE/ENTER] to confirm.• Press [EXIT] in order to return to the main menu.- Lamp on/off via power switchWith this function you can switch the lamp on or off via the power switch.• Select “LAAU” by pressing [UP] or [DN].• Press [ENTER], the display shows“ON” or “OFF”.• Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.• Press [MODE/ENTER] to confirm.• Press [EXIT] in order to return to the main menu.- Lamp on/off via external controllerWith this function you can switch the lamp on or off via an external controller.• Select “ONLI” by pressing [UP] or [DN].• Press [MODE/ENTER], the display shows“ON” or “OFF”.• Press [UP] to select “ON” if you wish to enable this function or [DN] to select “OFF” if you don’t.• Press [MODE/ENTER] to confirm.• Press [EXIT] in order to return to the main menu.- Delay lamp onWith this function you can delay the lamp ignition.• Select "DELA" by pressing [UP] or [DN].• Press [MODE/ENTER] to confirm; the display shows “D-00”. In this setting, the lamp will be ignitedimmediately.• Press [UP] to select the desired delay between "00" and "59" minutes. If you select “D-03” the lampwill be ignited after 3 minutes.• Press [MODE/ENTER] to confirm.• Press [EXIT] in order to return to the main menu.- Main menu 2setRPan rTIl 16BI DEGR REST LODAON-OFF ON-OFF ON-OFF 630-540 ON-OFF ON-OFFverv-1.0• Press [MODE/ENTER] to enter the main menu (display flashing).• Press [UP] or [DN] to select “SET”.50/11351838326_V_1_2.DOC