DualBrite® Motion Sensing Coach Light

4. Move the sensor head left or right to changethe coverage area. Note: Grasp the sensor onlyas shown and turn the entire sensor. Any othermethod may damage the sensor. Do notforce it past the stops.The sensor is less sensitive to motion directlytowards it and more sensitive to motion acrosscoverage area.MotionMotionLeast SensitiveSensorMost Sensitive150°Rotating Sensor Head to Change Coverage Area5. Adjust the SENSITIVITY to increase ordecrease the range as needed. Too much sensitivitymay cause false triggering due to heatsources in the coverage area (see Adjustmentof Coverage Area or Troubleshooting section).6. Set the amount of ON-TIME you want thelight to stay on after motion is detected (1, 5,or 10 minutes).7. Set the DualBrite® switch to off, 3 hours, 6hours, or dusk-to-dawn.6 ft.(1.8 m)30 ft.(9.1 m)150°150°OPERATIONMode: On-Time Works: Day NightTest 5 Seconds x xAuto 1, 5, or 10MinutesxAccent 3, 6 Hour,xTo DawnManual To Dawn* x* resets to Auto Mode at dawn.Note: When first turned on wait about 1 1 / 2 minutesfor the circuitry to calibrate.MANUAL MODEManual mode only works atnight because daylight returnsthe sensor to AUTO.Flip the light switch off for onesecond then back on to togglebetween AUTO and MANUALMODE.Manual mode works only withthe ON-TIME switch in the 1,5, or 10 position.1 SecondOFF then...... back on.Maximum RangeMaximumCoverage Angle(Top View)6 200254-02