DualBrite® Motion Sensing Coach Light

WIRINGWARNING: Turn power off at circuitbreaker or fuse.Note: All wiring must be run in accordance withthe National Electrical Code through conduitor another acceptable means. Contact a qualifiedelectrician if there is any question as to thesuitability of the system.CAUTION: DO NOT connect the REDwire unless you want to control otherlights from the motion sensor (see OptionalWiring).Connect the fixture wires to the wires in the junctionbox. Twist the wires together and secure withwire connectors.Recommended Grounding MethodUse a green ground “pigtail” (not provided) andtwist one end together with the bare fixture wireand the box ground wire. Secure with a wireconnector. Secure the other end of the “pigtail”with the GND screw on the mounting plate.BlackGreenor BareLightFixtureWhiteOne Motion LightWhiteBlack to blackWhite to whiteBlackGreenor BareLightFixtureLightFixtureIf you have metal junction box, you may not needthe green “pigtail”. If you are unsure about thegrounding method, consult your local buildingcode.Two Motion Lights200254-023