AGCO Advanced GIANT Spools - AGCO Parts

The giant difference of a Giant Spool.It’s no secret: Every twine change is simply another round of downtime. Add in the chanceof a miss-tie with each changeover, and it’s easy to see why the fewer changes you have,the better. When you switch to AGCO Advanced Giant Spools, you’ll pump your runningproductivity by as much as 38 percent. And that’s a difference you’ll see in your bottom line.Four sizes to match your productivity needs.6000/350 – 6,000 ft. in length, with 350 lbs. of tensile strength5500/400 – 5,500 ft. in length, with 400 lbs. of tensile strength5000/450 – 5,000 ft. in length, with 450 lbs. of tensile strength4000/600 - 4,000 ft. in length, with 600 lbs. of tensil strength6000/35024%5500/40038%5000/45025%4000/600 11%0 5 10 15 20 25 30 35 40 45 50% Increase in running time compared to standard spool sizes.If it doesn’t say Ultra Grip, it’s not an ultra knot.AGCO6000/350Advanced Baler Twine24%features Ultra Grip technology –an addition of a polypropylene mixture to our strongest twine.The 5500/400 result? Eighty percent more grip at the 38% knot than regular twine.Ultra Grip latches on tight and stays that way, reducing slippage5000/45025%and forming a firm, powerful knot that enables producers tocreate 4000/600 bales that are 11% 15-20 percent more dense than typical.0 5 10 15 20 25 30 35 40 45 50% de temps de fonctionnement en plus par rapportaux bobines de dimensions standardCompared to standard spool sizes, Giant Spools are up to 38% longer.Designed for the new generation of Massey Ferguson andChallenger balers.AGCO Advanced Giant Spools of Baler Twine fit only the new generationof large square balers by Massey Ferguson and Challenger. That meansyou’ll have an automatic edge over the twine-constrained large square balersof other equipment manufacturers.The highest-quality twine. And more of it.When you drop in an AGCO Advanced Giant Spool of Baler Twine, expectthe same twine quality you’ve come to trust. The same top-spec, virginplastic resin. The same proven UV stabilization to protect against lightdegradation. The same factory testing, pallet by pallet. And the same steady,reliable availability from AGCO Parts.© 2012 AGCO Corporation. AGCO and the AGCO logo, Massey Ferguson and Challenger are registered trademarks of AGCO Corporation. Printed in USA (12/12) 10528_SS