LEDI® 1S LEDI® 1S VERSION NTP LEDI® 2S - Gorgy Timing

8. CHARACTERISTICSPOWER SUPPLY►►230Volts +10,-15% 50-60hz►►Maximum consumption 5VA►►Incorporated interference filter►►Fuse inside, behind the socket 230. (Optional 230VAC on cable: fuse on rear panel)►►Lithium battery ensuring more than 10 years’ time base autonomySYNCHRONISATION INPUT►►Frequency reception : 77.5khz (DCF) and 162khz (TDF)►►Maximum distance between the antenna and the LEDI 1/S : 100 meters►►Maximum distance in relation to the DCF transmitter (mainflingen-Germany) or TDFtransmitter (France ) = 2000Kms (this value may be less depending on the weatherconditions and the surrounding relief)AFNOR NFS87500 CODE DEMODULATOR►►Electrical insulation by transformer►►Input impedance at 3 kohm, 1 khz►►Input level : 2.2 volts peak to peak , +10,-40DbTIME BASE►►Crystal stability : 5ppm – 10 to 60°C►►Pip output stability : 5 x 10 -6 on open collectorSMPTE / EBU CODE RECEIVER►►Input level : mini +/- 0.2 volts maxi +/- 12 volts►►Input impedance : 12 Kohms26 MDE-LEDI1S-2S-1066V1.0