NICE MOBY_ISTMOR1.pdf - Da.Ca. Electric
NICE MOBY_ISTMOR1.pdf - Da.Ca. Electric
NICE MOBY_ISTMOR1.pdf - Da.Ca. Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.7) <strong>Electric</strong>al connections:Connecting the connectorGBThe connector is supplied assembled and is located in the lower partof the gear motor (see item 48 of the spare parts list inside the cover).This is used to connect the electrical control unit.Remove the screw (8) and use a screwdriver to remove the other parts(as shown in the figure), including the screws (3).1 Seals2 Contact carriers3 Clamping screw4 Protection5 <strong>Ca</strong>ble holder6 Washer7 <strong>Ca</strong>ble clamp8 Fixing screw1 2345687N.B.: the connector protects to IP65 DIN 40050 only if it is correctlymounted as shown in the figure.Motor connections for models:MB4005 - MB4006 - MB4015 - MB4605MB4615 - MB5015 - MB5016 – MB5615Connect the cable wires to the “contact carriers 2” following theindications shown in the figure..1 = open2 = close3 = Common= EarthMotor connections for models:MB4024 – MB5024Connect the cable wires to the “contact carriers 2” following theindications shown in the figure.1 = Motor +2 = Motor -3 = Encoder +4 = Encoder -! Always remember to connect the earth cable accordingto current standards (EN 60204 - IEC 64-1 – EN 60335) asshown in the figure.7
Change language