NICE MOBY_ISTMOR1.pdf - Da.Ca. Electric

2.3.2) Fixing the front bracketThe front bracket (47) is fitted with its clamp to the gate according tothe distances D and E (see tables);before fixing permanently:1. Check that the closing line of the gear motor is perfectlyhorizontal (fig.4)2. Open and close the gate by hand to check it moves smoothly.3. Remove the gear motor and weld the front bracket (47)Fixing the rear of the gear motor (fig.5)Fix MOBY to the bracket (45) using the fork (46), screw (55), washer(59) and nut (61); completely tighten the latter and then unscrew it byabout 1/10 of a turn to give a little play.Fixing the front of the gear motor (fig.6)Fit the front fork of MOBY (34) into the front bracket (47) and clampwith the screw (56) and washer (60).GBMB4005MB4015 MB4024 MB4605 MB4615 MB4006 MB5015 MB5024 MB5615 MB5016D= 750mm D= 700mm D= 900mm D= 850mmA100mm110mm120mm130mm140mm150mm160mm170mm180mm190mm200mmMB4005 MB4015 MB4024 MB4605 MB4615 MB4006 MB5015 MB5024 MB5615 MB5016E= 625mmE= 615mmE= 605mmE= 600mmE= 590mmE= 580mmE= 570mmE= 560mmE= 550mmE= 540mmE= 530mmE= 595mmE= 585mmE= 575mmE= 570mmE= 560mmE= 550mmE= 540mmE= 530mmE= 520mmE= 510mmE= 500mmE= 775mmE= 765mmE= 755mmE= 750mmE= 740mmE= 730mmE= 720mmE= 710mmE= 700mmE= 690mmE= 680mmE= 745mmE= 735mmE= 725mmE= 720mmE= 710mmE= 700mmE= 690mmE= 680mmE= 670mmE= 660mmE= 650mm2.3.3) Opening the gate outwardsTo ensure the gate moves correctly, it may sometimes be necessaryto use a longer bracket (PLA6, optional) as shown in the figure.EACBE2.4) Adjusting the limit switchThe limit switch allows the stop position of the gate to be adjusted,thereby eliminating the need for travel stops and preventing the gatefrom hitting them. Simultaneously, a microswitch disconnects powerfrom the motor.A) Release the gear motor (see chapter 5)B Loosen the screw (54)C) Open the gate to the required positionD) Move the limit switch to the required position by turning thescrewE Tighten the screw (54)F) Models MB4006 and MB5016 also have a limit switch for theclosing position.max. 50mmmax. 50mm5