INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

qrtweAutomatic ButtonholeMachine settingq Stitch pattern: BHw Stitch width: 4 – 5e Stitch length: 0.5 – 1r Thread tension: At Presser foot: Automatic buttonhole foot RNOTES:The size of buttonhole is automatically determined byplacing the button in the automatic buttonhole foot.The button holder of the foot takes a button size up to 1"(2.5 cm) in diameter.Make a test buttonhole on a sample duplicating thefabric, interfacing and seams of the actual garment tocheck the settings.Use interfacing on stretch fabrics.zqwTurn the handwheel toward you to raise the needle to itshighest position.z Place the automatic buttonhole foot with the pin liesjust under the groove on the foot holder. Lowerthe foot lifter to snap the foot in place.q Groovew Pinxx Pull to open the button holder to the back (A), andplace the button in it. Push back (B) the buttonholder against the button to hold it tight.e Button holder(A)e(B)NOTE:For thick buttons, make a test buttonhole. If the buttondoes not fit through the test buttonhole, lengthen thebuttonhole by pulling the button holder a little to theback.rr Pull a little50