INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

Seam guides on the needle plateThe seam guides on the needle plate help you to measureseam allowance.The numbers indicate the distance between the centerneedle position and the seam guide.q Seam guidesNumber 15 20 4/8 5/8 6/8qSpacing (cm) 1.5 2.0 1.3 1.6 1.9Spacing (inch) 1/2 5/8 3/4Turning a square cornerThe cornering guide helps you maintain a 5/8” (1.6 cm)seam allowance when sewing a corner.wWhen the fabric edge facing you lines up with the corneringguide as illustrated, stop stitching and lower the needleinto the fabric by turning the handwheel toward you.Raise the presser foot and pivot the fabric so the edge ofthe fabric will align with the 5/8” (1.6 cm) seam guide.Lower the presser foot and start stitching in the newdirection.w Cornering guide40