INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

wreqtwBalancing Needle Thread TensionAuto-thread tensionThis machine is equipped wih the auo-thread tensioncontrol, which covers a wide range of sewing conditions.For general sewing, set the tension dial at “A”q Tension dialBalanced tension:The ideal straight stitch has threads locked between twolayers of fabric, as illustrated.For an ideal zigzag stitch, the bobbin thread does notshow on the right side (top side) of the fabric, and theneedle thread shows slightly on the wrong side (bottomside) of the fabric.w Needle thread (Top thread)e Bobbin thread (Bottom thread)r Right side (Top side) of fabrict Wrong side (Bottom side) of fabricNeedle thread tension is too tight:The bobbin thread (bottom thread) will appear on theright side (top side) of the fabric.Loosen the needle thread tension by moving the dial to alower number.Needle thread tension is too loose:The needle thread (top thread) will form loops on thewrong side (bottom side) of the fabric.Tighten the needle thread tension by moving the dial to ahigher number.36